张 伟,刘 菲.聚乳酸/柠檬酸三丁酯固-液共混材料的制备与性能研究[J].包装工程,2012,33(17):15-18.
ZHANG Wei,LIU Fei.Preparation and Characterization of Polylactide Acid/Tributyl Citrate Solid-liquid Blend Materials[J].Packaging Engineering,2012,33(17):15-18. |
| 聚乳酸/柠檬酸三丁酯固-液共混材料的制备与性能研究 |
| Preparation and Characterization of Polylactide Acid/Tributyl Citrate Solid-liquid Blend Materials |
| 投稿时间：2012-06-08 修订日期：2012-09-10 |
| DOI： |
| 中文关键词: 聚乳酸 柠檬酸三丁酯 固-液共混材料 |
| 英文关键词: polylactide acid tributyl citrate solid-liquid blend materials |
| 基金项目: |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 采用双螺杆挤出机液体进料工艺，制备了聚乳酸/柠檬酸三丁酯（PLA/TBC）固-液共混材料，表征了其性能。结果表明：双螺杆挤出机液体进料工艺能够精确控制TBC在PLA中的质量分数；傅里叶红外光谱仪微观结构表征了2877 cm-1特征峰的出现、羟基伸缩振动峰红移，证明TBC对PLA起到了增塑作用；当TBC含量为16%(质量分数)时共混材料从脆性材料转变为韧性材料；降解实验显示，这种共混薄膜在6个月内性能基本消失，轻微受力时薄膜粉碎。 |
| 英文摘要: |
| PLA/TBC solid-liquid blend materials were prepared through liquid feeding process in twin-screw extruder and its performance was characterized. Test results showed that the twin-screw extruder liquid feeding process can precisely control the mass fraction of the PLA in TBC score. 2877 cm-1 the characteristic peak and the emergence of —OH telescopic vibrating peaks red-shift was founded in FT-IR spectrometer inspection, which proved that TBC has the plastic role; when TBC content w=16%, its mechanical performance of materials change from brittle into ductile material; through the degradation test, the mechanical properties of PLA/TBC blend materials disappearance within 180 days and the film changes into pieces form by slightly power. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501716号