刘孟才,唐正宁,吴琰嘉.凹版胶印油墨转移的数值模拟[J].包装工程,2012,33(17):118-121.
LIU Meng-cai,TANG Zheng-ning,WU Yan-jia.Numerical Simulation of Ink Transfer for Gravure Offset Printing[J].Packaging Engineering,2012,33(17):118-121. |
| 凹版胶印油墨转移的数值模拟 |
| Numerical Simulation of Ink Transfer for Gravure Offset Printing |
| 投稿时间：2012-06-08 修订日期：2012-09-10 |
| DOI： |
| 中文关键词: 凹版胶印 油墨转移 流体体积法 非牛顿流体 |
| 英文关键词: gravure offset printing ink transfer VOF method non-newtonian fluid |
| 基金项目: |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 应用流体体积法，对非牛顿流体油墨的凹版胶印油墨转移的第2阶段进行了数值模拟，以研究油墨在网穴与橡皮布之间的转移。通过模拟结果，分析了油墨与平板及梯形槽壁的接触角、网穴深度对油墨转移率的影响，并提出了可获得最大油墨转移率的接触角组合。 |
| 英文摘要: |
| Fluid volume method was applied to simulate non-newtonian ink transfer in the second stage of gravure offset printing to study ink transfer from ink cell to rubber blanket. According to the simulation results, the influence of ink cell wall contact angle, plate contact angle and ink cell depth on ink transfer rate was analyzed. The contact angle combinations for the largest ink transfer rate were put forward. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501716号