米红林.基于CCD光学方法的纸浆模塑材料的厚度检测[J].包装工程,2012,33(19):139-141.
MI Hong-lin.Thickness Test of Molded Pulp Materials Based on CCD Optics Method[J].Packaging Engineering,2012,33(19):139-141. |
| 基于CCD光学方法的纸浆模塑材料的厚度检测 |
| Thickness Test of Molded Pulp Materials Based on CCD Optics Method |
| 投稿时间：2012-04-14 修订日期：2012-10-10 |
| DOI： |
| 中文关键词: 光学 纸浆模塑材料 壁厚测试 |
| 英文关键词: optics molded pulp material thickness test |
| 基金项目:上海应用技术学院重点学科（1020Q121001-化工过程机械）；上海市教育委员会一般项目（060Z028） |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 为检测纸浆模塑产品厚度，采用CCD的光学方法进行非接触式测量。通过标定，结果以待测物壁厚的灰度图形式给出，通过像素与实际厚度之间的转换,测出纸浆模塑产品厚度。实验表明,该方法能够准确测量1 mm以下包装产品厚度,且具有精度高、非接触测量、白光照明和适合现场测试的特点。 |
| 英文摘要: |
| Non-contact measurement method based on CCD optics was applied to test the thickness of molded pulp products. Through calibration, the results were given in gray image. According to the transformation relationship between pixel and actual thickness, the thickness of molded pulp products was measured. Experimental result showed that the method is effective to measure the product thickness lower than 1mm and has high precision, non-contact, light resource with white light and is suitable for field test. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501716号