程珮珮,程梦子,雷磊,何朝明.基于 SolidWorks的产品跌落仿真应用[J].包装工程,2014,35(13):51-55.
CHENG Pei-pei,CHENG Meng-zi,LEI Lei,HE Zhao-ming.Application of Drop Simulation Based on SolidWorks[J].Packaging Engineering,2014,35(13):51-55. |
| 基于 SolidWorks的产品跌落仿真应用 |
| Application of Drop Simulation Based on SolidWorks |
| 投稿时间：2014-01-07 修订日期：2014-07-01 |
| DOI： |
| 中文关键词: SolidWorks 跌落仿真 脆值 应力 |
| 英文关键词: SolidWorks drop simulation fragility stress |
| 基金项目:国家自然科学基金（51275431） |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 目的 研究物品跌落时的受力和结构变化， 有助于改善物品的抗冲击性能， 减小跌落破损概率，减少损失。 方法 采用基于 SolidWorks 的产品跌落仿真方法， 仿真某型陶瓷水杯的跌落过程， 仿真反映了产品跌落过程中各节点的速度、加速度和应力变化。 结果 杯子在 19.365 μ s 的垂直跌落过程中，最大应力在 5.534 μ s 时取得，始终在杯底的中部。 在对杯子结构进行改进后，同一跌落高度下最大应力由临界破损应力 1.720× 108 N/m2降为 1.549× 108 N/m2， 杯子受力得到显著改善。 结论 结合产品脆值的定义和应用 ， 提出了应用跌落仿真预估产品脆值， 指导产品设计和包装， 可缩短产品开发周期， 节约成本，提高产品质量。 |
| 英文摘要: |
| Objective To analyze the force and structure changes of falling objects, with the purposes of improving the shock resistance as well as reducing the drop breakage probability and damage. Methods Product falling simulation based on SolidWorks could vividly simulate the falling process of a certain type of ceramic cup, which showed the speed, acceleration and stress changes of each node during the dropping. Results The maximum stress occurred at 5.534 μs of the whole 19.365 μs vertical dropping process and kept acting on the center of the bottom of cup. After the cup structure was improved, the maximum stress was reduced from 1.720×108 N/m2 of critical stress of breakage to 1.549×108 N/m2. The strain on the cup was greatly improved. Conclusion Combining the definition and application of product fragility, product fragility estimation with dropping stimulation can be applied in product design and package guiding, which shortens the development period and reduces the cost while improving the product quality. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501716号