李雅琳,张健,曲柳,平清伟,牛梅红,石海强,李娜.丝网印刷工艺对硅藻土壁纸印刷效果的影响[J].包装工程,2014,35(23):143-148. LI Ya-lin,ZHANG Jian,QU Liu,PING Qing-wei,NIU Mei-hong,SHI Hai-qiang,LI Na.Effect of Screen Printing Technology on the Printing Results of Diatomite Wallpaper[J].Packaging Engineering,2014,35(23):143-148. |
丝网印刷工艺对硅藻土壁纸印刷效果的影响 |
Effect of Screen Printing Technology on the Printing Results of Diatomite Wallpaper |
投稿时间:2014-01-11 修订日期:2014-12-10 |
DOI: |
中文关键词: 硅藻土壁纸 丝网印刷 印刷压力 刮板角度 网距 正交试验 |
英文关键词: diatomite wallpaper screen printing printing pressure squeegee angle screen distance orthogonal experiment |
基金项目:国家自然科学基金 (31200456); 辽宁高校优秀人才计划 (LTQ2013060); 大连工业大学校内青年基金 |
|
摘要点击次数: |
全文下载次数: |
中文摘要: |
目的 研究硅藻土壁纸丝网印刷的最佳工艺条件。方法 以印刷压力、 刮板角度和网距等3个主要影响因素为实验因素, 设计正交试验。以实地密度和色差为考察指标, 通过极差与方差分析3个因素对实验结果的影响。结果 硅藻土壁纸丝网印刷的最佳工艺条件为印刷压力0.5 MPa、 刮板角度75°、 网距7 mm。结论 用最佳工艺条件印刷的硅藻土壁纸效果良好, 阶调复制曲线接近理想曲线, 为实际印刷提供了现实依据。 |
英文摘要: |
Objective To study the optimal condition of screen printing of diatomite wallpaper, to in order to obtain better printing quality. Methods The optimal printing condition was revealed by orthogonal experiment. The printing pressure, squeegee angle and screen distance were introduced as experimental factors. The effects of these factors on the field density and color difference were discussed by range and variance analysis. Results The results showed that the optimal condition was printing pressure 0.5 MPa, squeegee angle 75°, screen distance 7 mm. Conclusion The printing effect of diatomite wallpaper printed under optimal condition was good, and its tone reproduction curve was close to the ideal curve. This study provides practical basis for actual printing. |
查看全文
查看/发表评论 下载PDF阅读器 |
关闭 |
|
|
|