潘愈康,王文格,肖振乾.伺服驱动凸轮滑块分离装置联合仿真研究[J].包装工程,2016,37(17):150-156. PAN Yu-kang,WANG Wen-ge,XIAO Zhen-qian.Electromechanical Co-simulation of Servo Drive Cam-slider Separation Device[J].Packaging Engineering,2016,37(17):150-156. |
伺服驱动凸轮滑块分离装置联合仿真研究 |
Electromechanical Co-simulation of Servo Drive Cam-slider Separation Device |
投稿时间:2016-03-01 修订日期:2016-09-10 |
DOI: |
中文关键词: 伺服驱动 分离装置 动力学模型 联合仿真 |
英文关键词: servo driven separation device dynamic model co-simulation |
基金项目:国家自然科学基金(51275162) |
|
摘要点击次数: |
全文下载次数: |
中文摘要: |
目的 研究某包装机械凸轮滑块分离装置的性能,利用机电联合仿真方法对伺服驱动凸轮滑块分离装置系统进行有效的性能预测。方法 提出一种独立伺服驱动凸轮滑块分离装置机电联合仿真分析方法。建立分离装置的动力学模型,并研究其动力学特性;对控制系统进行分析,建立三环控制模型,整定控制参数;进行ADAMS/Matlab联合仿真研究。结果 从仿真结果可知,由于系统存在负载波动,导致最大位置跟随误差达到4.1709°。对控制系统进行改进后,最大位置跟随误差减小到0.0440°。系统稳态跟随误差在允许范围之内,与仿真结果基本一致。结论 利用机电联合仿真方法能够对伺服驱动凸轮滑块分离装置系统进行有效的性能预测。 |
英文摘要: |
The work aims to study the performance of the cam-slider separation device of packing machinery, and use electromechanical co-simulation method to predict the performance of the servo driven cam-slider separation device system. A electromechanical co-simulation analysis method of independent servo driven cam-slider separation device was presented. A dynamic model of the separation device was established and its dynamic characteristics were analyzed. Via analyzing the control system, the three-loop control model was established and parameters were set up. The electromechanical co-simulation model based on ADAMS/Matlab was built up. The simulation results showed that the maximum tracking error reached 4.1709° because of the system load fluctuation. According to the analysis of results, the control system was improved, and the maximum position tracking error was reduced to 0.0440°. The experimental results showed that the system steady-state error was within the allowable range, and the results were basically consistent with the simulation results. In conclusion, using electromechanical co-simulation method can effectively predict the performance of the servo driven cam-slider separation device system. |
查看全文
查看/发表评论 下载PDF阅读器 |
关闭 |