孙德强,李靖靖,李国志,郝静,金强维,史英惠,李耿,胡昕.逐层交错对瓦楞纸板静态缓冲性能的影响[J].包装工程,2018,39(21):42-47. SUN De-qiang,LI Jing-jing,LI Guo-zhi,HAO Jing,JIN Qiang-wei,SHI Ying-hui,LI Geng,HU Xin.Influences of Interlacement Mode Layer by Layer on Static Cushioning Properties of Corrugated Paperboard[J].Packaging Engineering,2018,39(21):42-47. |
逐层交错对瓦楞纸板静态缓冲性能的影响 |
Influences of Interlacement Mode Layer by Layer on Static Cushioning Properties of Corrugated Paperboard |
投稿时间:2018-05-21 修订日期:2018-11-10 |
DOI:10.19554/j.cnki.1001-3563.2018.21.009 |
中文关键词: 瓦楞纸板 逐层交错 侧压试验 平压试验 缓冲性能 |
英文关键词: corrugated paperboard interlacement mode layer by layer edgewise compressive test flatwise compressive test cushioning properties |
基金项目:国家自然科学基金(51575327);陕西省教育厅重点试验室及基地项目(16JS014);陕西省教育厅2014陕西本科高校专业综合改革试点子项目(陕教高[2014]16号) |
|
摘要点击次数: |
全文下载次数: |
中文摘要: |
目的 研究在逐层交错的方式下,交错角度对瓦楞纸板静态缓冲性能的影响。方法 将单瓦楞纸板以逐层交错的方式粘合,制得0°,30°,45°,60°,90°等5种角度的试样,通过平压试验和侧压试验,研究交错角度对瓦楞纸板承载性能和吸能性能的影响。结果 交错角度对试样的密实化应变影响较小;在侧压试验中,交错角度在0°~45°之间时,试样的侧压强度和比吸能随着角度的增大而减小;交错角度在45°~90°之间时,随着角度的增大,试样的侧压强度和比吸能先增大后减小;在平压试验中,交错角度对试样的平均抗压强度和比吸能影响较小。结论 交错角度对瓦楞纸板侧压缓冲性能影响较大,对平压缓冲性能影响较小。 |
英文摘要: |
This paper aims to study influences of interlacement mode layer by layer on static cushioning properties of corrugated paperboard. Single corrugated paperboards were glued with the interlacement mode to obtain specimens with five different interlacement angles of 0°, 30°, 45°, 60° and 90°. By edgewise compressive test and flatwise compressive test, influences of interlacement angles on the bearing capacity and energy absorbing capacity of corrugated paperboard were studied. The results show that interlacement angles had little effect on the densification strain of specimens. In edgewise compressive test, when the interlacement angles were between 0°~45°, the edgewise compressive strength and specific energy absorption decreased with the increase of interlacement angles. However, the edgewise compressive strength and specific energy absorption of specimens first increased and then decreased with the increase of interlacement angles when the angels were between 45°~90°. In the flatwise compressive test, interlacement angles had little influence on the mean crushing strength and specific energy absorption of specimens. Therefore, it is concluded that interlacement angles have great influence on the edgewise compressive cushioning properties, and have little influence on the flatwise compressive cushioning properties of corrugated paperboard. |
查看全文
查看/发表评论 下载PDF阅读器 |
关闭 |
|
|
|