刘平平,胥宏,李刚俊,索来春.激光打印机打印歪斜度的校正方法研究[J].包装工程,2019,40(9):167-173.
LIU Ping-ping,XU Hong,LI Gang-jun,SUO Lai-chun.Correction Method for the Printing Skew of Laser Printer[J].Packaging Engineering,2019,40(9):167-173. |
| 激光打印机打印歪斜度的校正方法研究 |
| Correction Method for the Printing Skew of Laser Printer |
| 投稿时间：2018-09-06 修订日期：2019-05-10 |
| DOI：10.19554/j.cnki.1001-3563.2019.09.027 |
| 中文关键词: 激光打印机 打印歪斜 激光束 校正方法 测试样张 |
| 英文关键词: laser printer printing skew laser beams correction method test sample |
| 基金项目:国家自然科学基金（51705041） |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 目的 针对激光打印机常见的打印图像歪斜问题，以激光打印原理为理论基础，研究并设计打印歪斜的校正方法。方法 首先，利用激光打印机自身的硒鼓结构制作测试组件，详细介绍其制作方法及工作原理；然后，设计专门的测试样张；最后，将测试组件放入打印机，并打印该测试样张。结果 按照文中所述的方法可精确检测并调整激光束位置，从而达到校正打印歪斜度的目的。结论 该方法可快速、精确地检测激光束的位置和歪斜状态，可将打印歪斜度精准校正至允许范围内，尤其适用于产品试制阶段的样机调试以及产品售后维保阶段。 |
| 英文摘要: |
| In view of the common skew of the printing image of a laser printer, the work aims to study and design the correction method of the printing skew based on the principle of laser printing. First of all, the laser printer's cartridge structure was used to make the test module, and the manufacturing method and working principle were introduced in detail. Secondly, a special test sample was designed. Finally, the test component was put into the printer and the test sample was printed. The laser beam position could be accurately tested and adjusted according to the proposed method so as to correct the skew of printing. This method can quickly and accurately test the position and skew state of the laser beam, and accurately correct the printing skew to the allowable range. This method is especially suitable for the debug of the prototype in the trial production stage and the maintenance phase of the product after sale. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501716号