引用本文:
【打印本页】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 2965次   下载 2189 本文二维码信息
码上扫一扫!
分享到: 微信 更多
新型四轴码垛机器人机构设计与动力学仿真分析
董海涛1, 武文革2
1.山西机电职业技术学院,山西 长治 046011;2.中北大学 机械工程学院,太原 030051
摘要:
目的 针对生产线码垛作业,设计一种四轴码垛机器人以满足货物搬运需求。方法 利用平行四边形机构对码垛机器人进行结构设计。根据码垛机器人的结构特点,采用运动D-H方法对该机器人进行运动学分析,通过SolidWorks建立码垛机器人实体模型,并将其导入Matlab中,在仿真环境中调整相应参数,得到机器人的动力学仿真模型,再利用Simulink添加控制模块、驱动模块和检测模块,建立完整的仿真模型。通过SolidWorks与Matlab两者的结合进行机器人动力学仿真分析。结果 运用SolidWorks与Matlab联合仿真,可以缩短设计周期,有效地获取其动力学特性参数。结论 四轴码垛机器人可以有效解决生产线上的码垛作业问题。
关键词:  码垛机器人  运动学  动力学仿真
DOI:10.19554/j.cnki.1001-3563.2020.03.027
分类号:TP242.2
基金项目:国家自然科学基金(51875533);山西省教育科学“十三五”规划“1331工程”研究专项课题(ZX-18125)
Mechanism Design and Dynamics Simulation of a New Four-axis Palletizing Robot
DONG Hai-tao1, WU Wen-ge2
1.Shanxi Institute of Mechanical & Electrical engineering, Changzhi 046011, China;2.School of Mechanical Engineering, North University of China, Taiyuan 030051, China
Abstract:
The work aims to design a new type of four-axis palletizing robot for palletizing operation of the production line. The parallelogram mechanism was used to design the structure of the palletizing robot. According to structural characteristics of the palletizing robot, the kinematics analysis of the robot was carried out by the MDH method. The robot solid model was established by SolidWorks and imported into Matlab. The corresponding parameters were adjusted in the simulation environment to obtain the dynamic simulation model of the robot. Then Simulink was used to add control module, driving module and detection module to establish a complete simulation model. Through the combination of the two, the robot dynamics simulation analysis was carried out. Co-simulation with SolidWorks and Matlab can shorten the design cycle of the robot and effectively obtain the dynamic characteristic parameters of the robot. The new four-axis palletizing robot can effectively solve the problem of palletizing operations on the production line.
Key words:  palletizing robot  kinematics  dynamics simulation

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第26513326位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号

引用本文:
【打印本页】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览次   下载  
分享到: 微信 更多
摘要:
关键词:  
DOI:
分类号:
基金项目:
Abstract:
Key words:  

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第26541878位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号