文章摘要
张微微,罗世永,王芳,廖瑞娟,张新林.LED固化橘纹油墨的制备及其流变性能[J].包装工程,2025,(5):57-63.
ZHANG Weiwei,LUO Shiyong,WANG Fang,LIAO Ruijuan,ZHANG Xinlin.Preparation and Rheological Characterization of LED-cured Orange-peel Ink[J].Packaging Engineering,2025,(5):57-63.
LED固化橘纹油墨的制备及其流变性能
Preparation and Rheological Characterization of LED-cured Orange-peel Ink
投稿时间:2024-10-15  
DOI:10.19554/j.cnki.1001-3563.2025.05.007
中文关键词: LED固化  橘纹  气相SiO2  流变性  包装纸盒
英文关键词: s, 2016, 37(12):7-9.
基金项目:
作者单位
张微微 北京印刷学院 印刷与包装工程学院北京 102600 
罗世永 北京印刷学院 印刷与包装工程学院北京 102600 
王芳 北京印刷学院 印刷与包装工程学院北京 102600 
廖瑞娟 北京印刷学院 印刷与包装工程学院北京 102600 
张新林 北京印刷学院 印刷与包装工程学院北京 102600 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 制备一种在纸包装表面产生橘纹的发光二极管(Light-Emitting Diode,LED)固化橘纹油墨。方法 在LED固化油墨的基础配方上加入气相SiO2,一方面降低纸张的吸墨性,另一方面调控油墨的流动性,使得丝网印刷后表面墨层在橘纹剂聚甲基硅氧烷的作用下易流动产生纹路,且纹路在固化前不流平,解决纸张表面橘纹效果差的问题;采用HR-10-TA流变仪表征橘纹油墨的流变、黏弹性等流变学性能。结果 油墨配方如下:光引发剂819为1%,热塑性聚烯烃弹性体(Thermoplastic Polyolefin,TPO)为4%,活性胺008为10%,活性单体ACMO为15%,聚氨酯丙烯酸预聚物为54.5%,色浆为10%,聚甲基硅氧烷为1.5%,气相SiO2为3.5%,蜡粉为0.5%。流变测试表明油墨具有剪切变稀的特性,其流动点为模量G'=G =813.9 Pa,对应频率为140.9 Hz。结论 加入气相SiO2调控油墨的流动性,聚甲基硅氧烷作为橘纹剂,在纸张表面丝网印刷、LED固化,制备的橘纹视觉效果良好。
英文摘要:
      The work aims to prepare a light-emitting diode (LED) curable orange-peel ink to generate an orange-peel effect on the surface of paper packaging. Gas-phase SiO2 was added to the basic formula of the LED curable ink, to reduce the ink absorbency of the paper on the one hand, and regulate the fluidity of the ink on the other hand. After screen printing, the surface ink layer was prone to flow and form patterns under the action of the orange-peel agent, polydimethylsiloxane, and the patterns did not level out before curing, solving the problem of poor orange-peel effect on the paper surface. The rheological properties such as rheology and viscoelasticity of the orange-peel ink were characterized with an HR-10-TA rheometer. The ink formula was as follows:photoinitiator 819 was 1%, thermoplastic polyolefin elastomer (TPO) was 4%, active amine 008 was 10%, active monomer ACMO was 15%, polyurethane acrylate prepolymer was 54.5%, color paste was 10%; polydimethylsiloxane was 1.5%, gas-phase SiO2 was 3.5%, and wax powder was 0.5%. Rheological tests showed that the ink had shear-thinning characteristics, with a flow point of modulus G'=G 2 to regulate the fluidity of the ink and using polydimethylsiloxane as the orange peel agent, the orange peel effect on the paper surface is visually good after screen printing and LED curing.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第26013366位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号